40
Installation RSR20/RSR30
Release 06 07/2021
To mount the device onto a horizontally mounted 35 mm DIN rail according
to DIN EN 60715, proceed as follows:
Slide the upper snap-in guide of the device into the DIN rail.
Press the media module downwards onto the clip-in bar.
Snap in the device.
Note:
The shielding ground of the industrial connectable twisted pair lines is
connected to the lower panel as a conductor.
2.2.2
Mounting on a vertical flat surface
You have the option of attaching the device to a vertical flat surface. This
requires a wall mounting plate, which you purchase as a separate accessory.
Verify that the device maintains the minimum clearance to meet the climatic
conditions during operation:
Top and bottom device side: 3.94 in (10 cm)
Left and right device side: 0.79 in (2 cm)
Summary of Contents for HIRSCHMANN RSR20 Series
Page 66: ......
