38
MACH 4000
Release 11/08
10/100 Mbit/s twisted pair connection PoE
10/100 Mbit/s ports (RJ45 socket) enable the connection of terminal de-
vices or independent network segments according to the IEEE 802.3
100BASE-TX / 10BASE-T and IEEE 802.3af (Power over ETHERNET on
data lines) standards. These ports support:
X
Autonegotiation
X
Autopolarity
X
Autocrossing (if autonegotiation is activated)
X
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
X
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
X
Power over ETHERNET. The maximum power available to you for all
ports combined for PoE applications is listed in the table on
page 17
.
State on delivery: Autonegotiation activated except for the ring ports:
100 Mbit/s, full duplex.
The socket housing is electrically connected to the front panel.
The PoE voltage is input via the wire pairs transmitting the signal (phan-
tom voltage).
Figure 13: Pin assignment of a TP/TX interface in MDI-X mode, RJ45 socket
10/100/1000 Mbit/s twisted pair connection
10/100/1000 Mbit/s twisted pair ports (RJ45 socket) enable the connec-
tion of terminal devices or independent network segments according to
the IEEE 802.3-2000 (ISO/IEC 8802-3:2000) 1000BASE-TX standard.
These ports support:
X
Autonegotiation
X
Autopolarity
X
Autocrossing (if autonegotiation is activated)
X
1000 Mbit/s full duplex
X
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
X
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
State on delivery: autonegotiation.
The socket housing is electrically connected to the front panel.
The pin assignment corresponds to MDI-X.
n.c. Pin 8
n.c. Pin 7
TD- Pin 6
n.c. Pin 5
n.c. Pin 4
Pin 3
TD+
Pin 2
RD-
Pin 1
RD+
Summary of Contents for HIRSCHMANN MACH 4000 Series
Page 56: ......
