8
MACH 4000
Release 11/08
If you are operating the device in a 19" switch cabinet: install sliding/
mounting rails for holding the device
(see on page 32 "Setting up/
mounting the basic switch device in the 19" rack")
.
Warning
If the device is installed in a 19" switch cabinet without sliding/
mounting rails, increased vibration can cause damage to the de-
vice and/or its modules.
Warning
When installing the device, make sure the ventilation slots re-
main free, as otherwise the device can overheat and be dam-
aged.
Environment
The device may only be operated at the specified maximum ambient tem-
perature and relative air humidity (non-condensing).
Install the device in a location where the climatic threshold values
specified in the technical data are adhered to.
Only to be used in an environment with the contamination level speci-
fied in the technical data.
Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and oper-
ation of this product and are appropriately qualified for their job. This in-
cludes, for example, those persons who have been:
X
trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
X
trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;
X
trained in providing first aid.
General safety instructions
This device is electrically operated. Adhere strictly to the safety require-
ments relating to voltages applied to the device as described in the oper-
ating instructions!
Non-observance of these safety instructions can therefore cause material
damage and/or serious injuries.
Only appropriately qualified personnel should work on this device or in
its vicinity. These personnel must be thoroughly familiar with all the
warnings and maintenance procedures in accordance with this oper-
ating manual.
Summary of Contents for HIRSCHMANN MACH 4000 Series
Page 56: ......
