Belden Hirschmann BAT867-R, User Manual

Page: 9 / 58

Installation BAT867-R
Release 10 09/2021
9

Qualified personnel are familiar with appropriate measures against
these hazards in order to reduce the risk for themselves and others.

Qualified personnel receive training on a regular basis.

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable
safety regulations.

When installing antennas, observe the regulations of the country in
which you are operating the WLAN device with regard to the general
operating permission and the maximum emission levels.

Install and operate this equipment with a minimum distance of 50 cm
(19.7 in) between the antenna and your body.

Grounding the device
For the functional earth (FE), there is a separate functional earth screw on
top of the device. The functional earth is electrically connected to the
circuit ground and the metal housing of the device.

Shielding ground
The overall shield of a connected shielded twisted pair cable is connected
to the grounding connector on the front panel as a conductor.

Beware of possible short circuits when connecting a cable section with
conductive shielding braiding.