Belden Hirschmann BAT867-R, User Manual

Page: 27 / 58

Installation BAT867-R
Release 10 09/2021
27
1.6 Connections for antennas
For the operation of the device you need antennas.
The devices have 2 Reverse SMA connectors for connecting external
antennas.
The "Antenna Guide" document provides an overview of the antennas that
can be used as well as the suitable antenna accessories.
The manual is available for download on the Internet:
https://
www.doc.hirschmann.com
1.7 Display elements
After the supply voltage is set up, the Software starts and initializes the
device. Afterwards, the device performs a self-test. During this process,
various LEDs light up.
1.7.1 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
P
Color Activity Meaning
green lights up LED lights up after the configuration
red flashing Device has detected at least one hardware error.
green/red short flashing No password or the default password is set
LS/DA
Color Activity Meaning
— off No network device connected
green lights up Ethernet connection active
yellow flashing Data traffic
WLAN
Color Activity Meaning
— off  No WLAN network specified

WLAN module deactivated

WLAN module does not send any beacons
green lights up  At least one WLAN network defined
 WLAN module activated
P
LS/DA
WLAN