Belden GRASS VALLEY NV9641, User Manual

Page: 43 / 111

33
NV9641
User’s Guide
Source P A source button selects a source. (Note that a quick source button
selects a source and also performs an immediate take.)
When you assign a source button, a drop-down menu appears:
‘Source Device’. Choose a device from the list.
The ‘None’ entry is merely a placeholder. Do not choose ‘None’.
Source
Master
Means “source is the master” and makes the source device the
master. Otherwise, the destination is the master.
The button is a toggle: Press it once to make the source the master (it
goes high-tally); press it again to make the destination the master
(the button is low-tally).
A panel option allows you to make “source is master” the default. In
this case, the button still toggles between “source is master” and
“destination is master,” and the button, if present, is high-tally by
default.
The ‘Source is Master’ button is also used to initiate “broadcast”
control routes. See
Broadcast Routes on page 69 .
Source/Desti
nation P A source/destination button selects both a source and a destination
at one time. A source/destination button can be configured to
perform an immediate take. If it is not, the operator must also press a
‘Take’ button to effect a take.
When you assign a source/destination button, two drop-down
menus appears: ‘Source Device’ and ‘Destination Device’. Choose a
device from each list. A ‘None’ entry is merely a placeholder. Do not
choose ‘None’.
Take P In X-Y mode, a take button switches the preset source device to the
selected destination device on selected levels.
In MD mode, a take button switches the preset source device(s) to
the selected destination device(s) on all levels.
Under the paging model, a take button switches the preset source
device to the selected destination device on all levels.
In most cases, configurers should provide the operator a ‘Take’
button.
Undefined P Makes the button undefined and inactive. On the actual panel, it will
remain unlit (dark).
Virtual Level
Contract In X-Y mode, this button causes the alphanumeric display to show
virtual levels at the
highest level of grouping (with the least detail).
The button affects only virtual levels that have been grouped. See
Level Grouping on page 56 .
The button has no effect in multi-destination mode.
This button has no configuration options.
Type Paging Description