Belden Grass Valley MCP 450, User Manual

Page: 34 / 44

34 MCP 450 Master Control PC User’s Guide (v1.1)
Chapter 3 - Operation
The following table shows which actions are available for each file location:
Recall
Copies the selected scene file from its file location to the camera’s current settings file.
☞
Note
☞
Note
It is not possible to recall a scene file while the camera is On Air. The message ‘On Air!’ is
displayed.
Store
Copies the camera’s current settings file into the selected scene file location. This action is not
available when the location is protected.
☞
Note
☞
Note
The existing file stored in this location will be deleted.
Save to USB
Copies the scene file from this location to the MCP 400’s USB Flash Drive.
Load from USB
Copies the scene file from the MCP 450’s USB Flash Drive into this location. This action is not
available when the location is protected.
Rename
Changes the name of the scene file in this location. This action is not available when the
location is protected.
☞
Note
☞
Note
Files stored on the USB Flash Drive will not be renamed by this operation.
Scene files
1,2,3 and 4 Current
settings
Factory
standard
Customer
standard
Recall Yes - Yes Yes
Store Yes - - Yes
Save to USB Yes Yes Yes Yes
Load from USB Yes Yes - Yes
Rename Yes - - -
Protect/Unprotect Yes - - Yes