Belden Grass Valley MCP 450, User Manual

Page: 22 / 44

22 MCP 450 Master Control PC User’s Guide (v1.1)
Chapter 3 - Operation
3.1.5 Secondary color corrector
Click or tap the Color Corrector button at the left side to display two items in the function field:
Color Corrector On/Off and Color Corrector Config. Click or tap
Config to open the Color
Corrector window.
Tip
✎
Use color correction to adjust hue, saturation and luminance of partial areas of the color
spectrum of the image. Typical applications include live sports or news productions.
Carry out the following steps to set up the Color Corrector:
1. Click or tap Color Corrector at the top right of the screen.
2. Click or tap Set Select and select a color correction set.
3. Click or tap Set Active to activate (or de-activate) the selected set.
4. Click or tap Color and use the Value Selector at the right to select a color. Click or tap
Width and use the Value Selector to select an area on the color wheel. The color width
can be varied between 22.5° and 360°.
5. To view the selected color area, clickor tap View . Turn view mode off before going on air.
6. Click or tap Hue , Saturation or Luminance and use the Value Selector to change hue,
saturation and luminance and the selected color area.
7. The transition between the corrected and uncorrected color area can be set to sharp ,
medium or smooth using the Smoothing setting (top right).
8. To reset all color corrector settings to their initial/default values, click or tap Reset at the
top right.
9. Click or tap X at the top-right to close the window.
Color/Width
area
Hue/Saturation/
Luminance area
Color
Wheel
Value selector