Belden Grass Valley LUMO, User Manual

Page: 55 / 71

41
LUMO
User Manual
Card-Front Status LEDs
These LEDs monitor the status of the electrical inputs to the FIO-911 Quad Tx:
•
Green = SDI signal OK
•
Yellow = No lock
•
Red = No signal
•
Flashing Red = SFP not present, or SFP not detected, or hardware failure
FIO-911-4TH-CwwCxxCyyCzz-LC
High Power Quad 3 Gbps/HD/SD Optical CWDM Transmitter
with LC/PC connector
This variant utilizes two dual high-power CWDM optical transmitters at its outputs to send four
channels, each of which enters on a rear-panel DIN, is equalized, reclocked, E-to-O converted,
and sent to the SFP transmitter. For the DIN frame only, each electrical input is also reclocked
and sent to the matching electrical output on the rear panel.
The two signals entering each CWDM transmitter module are modulated at different
wavelengths.
The model number for this device identifies the two included SFP high-power CWDM trans-
mitter modules by specifying the wavelengths of their output:
CwwCxx and CyyCzz Wavelength (nm) Color Code
C27C29 1271/1291 Light Purple
C31C33 1311/1331 Yellow Green
C35C37 1351/1371 Pink
C39C41 1391/1411 White
C43C45 1431/1451 Black
C47C49 1471/1491 Gray
C51C53 1511/1531 Blue
C55C57 1551/1571 Yellow
C59C61 1591/1611 Red
Note that both SFP modules can operate at the same wavelengths.