22
Setting up the Kaleido-IP VM
System Setup
4 Repeat this procedure until you have added all required unicast transport streams to
your system configuration.
5 On the
File
menu, click
Save
. Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Defining Logical Sources
To define logical sources for a transport stream
1 In the main window, click the
Channels/Sources
tab.
2 In the
Tools
pane, expand the multiviewer, and navigate to the transport stream for
which you wish to define logical sources.
3 Right-click the transport stream, and then click
Create logical sources
on the menu.
Logical sources are automatically created for every program signal found in the
selected transport stream.
4 Repeat until you have added logical sources for every stream you wish to monitor.
5 If your system involves a control panel from which you will control your multiviewer as
a router, then configure source numbers for the
KX Router
logical router, by typing the
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.
• Under the network adapter elements, transport streams are listed in
alphabetical order.
Notes
(continued)
Summary of Contents for grass valley KALEIDO-IP VM
Page 27: ......
