19
Kaleido-IP VM
Quick Start Guide
8 On the
File
menu, click
Save
. Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Adding Stream Sources
If you are configuring a four-port, or a six-port Kaleido-IP VM model, or you wish to monitor
sources from Unicast streams or from other types of transport streams, or more sources
from Multicast streams, then you need to add transport streams to the basic system
configuration. See
Adding a Multicast Transport Stream
Refer to
Managing Transport Streams in a Kaleido-IP System Representation
, in the Kaleido-X
User’s Manual, for instructions on:
• importing transport stream configuration information, from a spreadsheet
• adding source-specific or source-filtered multicast (SSM or SFM) transport streams
• adding HLS playlists
• adding RTSP transport streams
• adding RTMP transport streams
• adding NMOS devices
Adding a Multicast Transport Stream
To add a multicast transport stream
1 In the main window, click the
System
tab, and then click
Description/Calibrations
on
the second level tab bar.
2 Expand the System hierarchical list, right-click the appropriate network adapter for the
source you wish to add, and then click
insert Multicast
.
The
Multicast Stream Configuration
window appears.
3 In
Multicast Stream Configuration
, replace the default stream name if desired, select
the appropriate protocol (RTP, UDP), and type the multicast group address and port
number associated with the transport stream you wish to add.
Summary of Contents for grass valley KALEIDO-IP VM
Page 27: ......
