GUIDE TO INSTALLATION AND OPERATION
22
| SME-1901 / 1911
The
Profile
column shows the same information as is shown for the current card in the Copy profile from line, i.e. one
of the following:
•
Current, User1, User2, User3, User4, User5
The
Select
column includes a checkbox to identify which SME-1901 or SME-1911 cards you wish to copy profiles into
from the current card.
•
For convenience, a
Select all
checkbox is provided in the column header.
Click
Copy
to copy the selected profiles from this card into the selected other SME-1901 or SME-1911 cards.
•
While the profile copy operation is in progress, the Transfer Status box on the right of the
Copy profile to
line will
indicate
Working
against a yellow background.
•
When the profile copy operation is complete, the Transfer Status box on the right of the
Copy profile to
line will
indicate
Succeeded
against a green background.
Reset IP
Click the button to reset the SME-1901/1911 IP configuration and streaming configuration to the indicated factory
preset values, overriding and replacing the values in the
and
A warning panel allows you to confirm or reject the
reconfiguration.
Restart Codec…
If the streaming output appears blocked or locked up after the input signal format changes, click this button to
restart the codec. It may take up to 100 seconds to resume streaming.
A warning panel allows you to confirm or reject the
restart.
Figure 5-16 Reset IP confirmation
Figure 5-17 Restart Codec confirmation
