Installation WLC
Release 04 07/2019
11
1.3
Status displays and interfaces
Meanings of the LEDs
Note:
In addition to the LEDs, the LANmonitor shows far more information
about the status of the devices.
In the following sections, we use different terms to describe the behavior
of the LEDs:
Blinking means, that the LED is switched on or off at regular intervals
in the respective indicated color.
Flashing means, that the LED lights up very briefly in the respective
color and stays then clearly longer (10x longer) switched off.
Inverse flashing means the opposite. Here the LED lights permanently
in the respective color and is only briefly interrupted.
Flickering means, that the LED is switched on at irregular intervals.
1.3.1
Status displays
The BAT-Controller WLCs offers the following status displays:
Figure 1: Status displays in WLAN Controller
1 Power
2 Fan
3 COM
4 WLAN
5 New APs
6 Lost APs
7 CA
8 VPN
9 LCD display
10 LEDs for the LAN interfaces ETH 1 to ETH 4 for data rate (orange, left)
and connection status (green, right)
Summary of Contents for 942 034-001
Page 28: ......
