Installation WLC
Release 04 07/2019
17
Note:
After resetting, the device starts completely without any
configuration and any settings are lost. If possible, restore the current
device configuration before resetting.
1.4
Hardware installation
Installing the BAT-Controller WLC involves the following steps:
Mounting – mount the device in a 19”-cabinet.
LAN – Firstly connect your BAT-Controller WLC to the LAN. Plug one end
of the supplied network cable (green connectors) into an Ethernet port on
the device (figure 2, position 2) and the other end into an available
network connector socket in your local network. The Ethernet ports use
autosensing to recognize the data rate (10/100/1000 Mbps) and the type
(MBI/MBI-X) of attached network devices. You can connect devices of
different speeds and types in parallel.
Configuration interface – optionally, connect the device directly to the
serial interface (RS-232, V.24) of a PC. Use the included serial
configuration cable for this connection. Connect the configuration
interface (figure 2, position 1) to an available serial interface on the PC.
Supply power and switch on – supply power to the device by using the
power connection (figure 2, position 6). Afterwards, switch it on by using
the switch located on the rear panel (figure 2, position 5).
1.5
Software installation
Place the product CD into your drive.
Start the files for the installation from the directory \Firmware and
Tools\LANtools:
HAC-LANconfig-<version>.exe LANconfig is the Windows configuration
program for Hirschmann wireless devices. Use WEBconfig alternatively
or in addition via a web browser.
HAC-LANmonitor-<version>.exe Monitor your wireless devices with
LANmonitor a Windows computer.
WLANmonitor enables the observation and surveillance of wireless LAN
networks. Furthermore, the WLANmonitor shows the WLAN controller,
access points, and the clients connected to the access points. With the
functions Rogue AP Detection and Rogue Client Detection, the
WLANmonitor shows foreign access points and clients.
Note:
The installation file for the LANmonitor installs the WLANmonitor
automatically on your PC.
Summary of Contents for 942 034-001
Page 28: ......
