Belanger SABER SL-2, Programming And Operations Manual

Page: 41 / 68

SL2: 1063 PROGRAMMING AND OPERATION
1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
4-3
Chapter 4 Operator Interface/Advanced Configuration
Setup / Advanced Configuration
Advanced Configuration / Application Configuration
NAMED 1 - 8
NAMED ON or OFF ON ON OFF WP
YES / NO FS / FE 000 FS / FE 000 FS / FE 000 YES / NO
Name of OUTPUT.
Typically renamed
to match the
application.
Toggles between
YES and NO.
If set to YES, the
Output will function
with that
application.
Toggles between FS and FE.
FS stands for “From Start”. FE stands for
“From End”.
The three zeros are the “Measured in
Inches”.
Each NAMED 1 – 8 have two ON
positions.
Toggles between
FS and FE.
FS stands for
“From Start”. FE
stands for “From
End”.
The three zeros
are the “Measured
in Inches”.
Each NAMED 1 –
8 have one OFF
position.
They all turn OFF
at the end of
application.
Toggles between
YES and NO.
If set to YES, the
Output will turn off
during B/F
(Butterfly) in
motion to flush
pump.
MISCELLANEOUS 1 - 7
MISC NAMED ON or OFF ON OFF PFFA WP
YES / NO FS / FE 000 FS / FE 000 YES / NO YES / NO
Name of OUTPUT.
Typically renamed
to match the
application.
Toggles between
YES and NO.
If set to YES, the
Output will function
with that
application.
Toggles between
FS and FE.
FS stands for
“From Start”. FE
stands for “From
End”.
The three zeros
are the “Measured
in Inches”.
Each MISC 1 – 7
have one ON
position.
Toggles between
FS and FE.
FS stands for
“From Start”. FE
stands for “From
End”.
The three zeros
are the “Measured
in Inches”.
Each MISC 1 - 7
have one OFF
position.
Toggles between
YES and NO.
PFFA stands for
“Position From
Front Always”.
Toggles between
YES and NO.
If set to YES, the
Output will turn off
during B/F
(Butterfly) in
motion to flush
pump.