Beko WTV8744 X0, User Manual

Page: 57 / 60

EN / 57
Washing Machine / User’s Manual
Problem Cause Solution
Detergent residue
in the detergent
drawer. (**)
Detergent was put in wet
drawer.
• Dry the detergent drawer before putting
in detergent.
Detergent has gotten damp. • Keep detergents closed in an
environment free of humidity and do not
expose them to excessive temperatures.
Water pressure is low. • Check the water pressure.
The detergent in the main
wash compartment got wet
while taking in the prewash
water. Holes of the detergent
compartment are blocked.
• Check the holes and clean if they are
clogged.
There is a problem with the
detergent drawer valves.
• Call the Authorised Service Agent.
Detergent was mixed with the
softener.
• Do not mix the softener with detergent.
Wash and clean the drawer with hot water.
Regular drum cleaning is not applied. • Clean the drum regularly.
Too much foam
forms inside the
product. (**)
Improper detergents for the
washing machine is used.
• Use detergents appropriate for the
washing machine.
Excessive amount of
detergent is used.
• Use only sufficient amount of detergent.
Detergent was stored under
improper conditions.
• Store detergent in a closed and dry location.
Do not store in excessively hot places.
Some meshed laundry such
as tulle may foam too much
because of their texture.
• Use smaller amounts of detergent for
this type of item.
Detergent was put in the
wrong compartment.
• Put the detergent in the correct
compartment.
Softener is being taken early
by the product.
• There may be problem in the valves or in
the detergent drawer. Call the Authorised
Service Agent.
Foam is overflowing
from the detergent
drawer.
Too much detergent is used. • Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
• Put detergent into the product suitable
for the programmes and maximum loads
indicated in the “Programme table”.
When you use additional chemicals (stain
removers, bleaches and etc), reduce the
amount of detergent.