Beko WTV8744 X0, User Manual

Page: 15 / 60

EN / 15
Washing Machine / User’s Manual
6. Installation
6.1 Appropriate installation location
WARNING!
• Damaged products cause risks for your safety.
- Prior to installation, visually check if the product has any
defects on it.
- If so, do not have it installed.
CAUTION!
• Do not place the product on a floor without sufficient
capacity to carry the load.
- Otherwise, the product or the floor may be damaged.
- Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other is
approx. 180 kilograms.
• Do not install the product in places where there is the risk
of freezing.
- Otherwise, your product will be damaged and your house
will be under risk of flood.
NOTE
• Preparation of the location and electrical, tap water and
waste water installations at the place of installation
is under customer's responsibility. Make sure that the
installation and electrical connections of the product are
performed by competent persons.
• Make sure that the water inlet and drain hoses as well as
the power cable are not folded, pinched or crushed while
pushing the product into its place after installation or
cleaning procedures.
• Manufacturer shall not be held liable for damages that may
arise from procedures carried out by unauthorised persons.
a) Place the product on a rigid, flat and level surface.
b) Never place the product on a carpet-covered floor.
c) Do not lean the product on furniture, keep a distance between
them.
d) Do not place the product on any platform.