background image

EN

13

the "Programme Selection Table". 

Washing results will degrade when the 

machine is overloaded.

Following weights are given as examples. 

Laundry type

Weight (gr)

Bathrobe

1200

Napkin

100

Duvet cover

700

Bed Sheet

500

Pillowcase

200

Tablecloth

250

Towel

200

Hand towel

100

Evening gown

200

Underclothing

100

Men’s coveralls

600

Men’s shirt

200

Men’s pyjamas

500

Blouses

100

Loading door

The loading door will be locked while the 

Programme is running. The door can only 

be opened a while after the Programme 

comes to an end.

•  Open the loading door.

•  Place laundry items loosely into the 

machine.

•  Push the loading door until it clicks 

into place tightly. Ensure that no items 

are caught in the door.

Choosing the detergent type

The type of detergent to be used depends

on the type and colour of fabric.

•  Use different detergents for coloured 

and white clothes.

•  Wash woollens with a special 

detergent specifically for woollens.

•  Use only detergents manufactured 

specifically for automatic washing 

machines.

Detergents and softeners

Detergent Drawer

Detergent drawer of your washing machine 

consists of four different compartments 

for powder main wash detergent, liquid 

main wash detergent, liquid softener 

and powder pre-wash detergent. Each 

of these laundry additives are dispensed 

automatically in the relevant time during 

the washing Programme. 

Do not place the laundry additives directly 

into the drum. Always use the detergent 

drawer.

Do not close the drawer too fast after 

putting the laundry additives. This may 

cause the additives to be dispensed early, 

creating unsatisfactory washing results 

and fabric damage.

C

 Do not open the drawer during 

washing Programme.

The detergent drawer compartments 

are indicated below:

1)  Left compartment with number "II" 

(Main wash compartment for powder 

detergent or powder bleach/stain 

remover)

2)  Left compartment with number "II 

" (Main wash compartment for liquid 

detergent or liquid stain remover)

3)  Middle compartment with number "I" 

(pre-wash compartment for powder 

detergent, powder stain remover or 

liquid bleach - liquid bleach must be 

added either during the pre-wash 

or during the first rinsing step of the 

washing Programme). Liquid bleach 

must be added manually while the 

machine takes in water.

4)  Right compartment with " ” symbol 

(liquid softener compartment)

1

2

3

4

Summary of Contents for WMI 61241

















































Reviews: