background image

EN

32

- Washing performance is poor: Oily stains appear on laundry. 

- Washing performance is poor: Bad odour

- Oily accumulations on the drum may 

have stuck to the laundry.

- Oily accumulations on the drum may 

have stuck to the laundry.

- Such odours and bacteria layers are formed on 

the drum as a result of continuous washing at lower 

temperatures and/or in short Programmes.

- Leave the detergent dispenser drawer as well 

as the loading door of the machine ajar after each 

washing. Thus, a humid environment favorable for 

bacteria cannot be created inside the machine.

- Machine must be operated empty either at 60°C 

or 90°C Programme with detergent every 6 months.

Colour of the clothes faded.

- Excessive laundry loaded into machine.

- Detergent may have gotten damp.

- A higher temperature might have been 

selected.

- Do not load the machine in excess

- Store detergent in a closed and dry location.

- Do not keep them under high temperatures.

- Select the proper Programme and temperature 

according to the type and soiling degree of the 

laundry.

It does not rinse well.

- The amount, brand and storage 

conditions of the detergent used might not 

be appropriate.

- Detergent might have been put in the 

wrong compartment.

- Machine filter may be clogged.

- Drain hose may be folded.

- Intermediate spins may be skipped.

- Store detergent in a closed and dry location. Do 

not keep them under high temperatures.

- If detergent is put in the prewash compartment 

although prewash cycle is not selected, machine 

can take this detergent during rinsing or softener 

step.

- Check the filter.

- Check the drain hose.

- There may be an imbalance of laundry in the 

machine.

- The laundry in the drum may be clustered 

(bundled laundry in a bag). Laundry should be 

rearranged and re-spun.

- No spinning is performed when the laundry is 

not evenly distributed in the drum to prevent any 

damage to the machine and to its environment.

Clothes stiffened.

- Insufficient amount of detergent used.

- The detergent may have been placed into 

the wrong compartment; the detergent 

may be mixed with the softener.

- If the water hardness is higher, using insufficient 

amount of detergent can cause the laundry to 

become stiff in time. Use appropriate amount of 

detergent according to the water hardness.

- If detergent is put in the prewash compartment 

although prewash cycle is not selected, machine 

can take this detergent during rinsing or softener 

step.

- Do not mix the softener with detergent when 

putting in the compartment.

- Wash and clean the drawer with hot water.

Summary of Contents for WMI 61241

















































Reviews: