Beko HTV8733XC0M User Manual Download Page 66

Page: 66 / 68

66 / EN

Washer-Dryer / User’s Manual

Troubleshooting

Laundry became stiff after washing. (**)

• Insufficient amount of detergent is used. >>>

Using insufficient amount of

detergent for the water hardness can cause the laundry to become stiff in time. Use

appropriate amount of detergent according to the water hardness.

• Detergent is put in the wrong compartment. >>>

If detergent is put in the prewash

compartment although prewash cycle is not selected, machine can take this detergent

during rinsing or softener steps. Put the detergent in the correct compartment.

• Detergent was mixed with the softener. >>>

Do not mix the softener with detergent.

Wash and clean the drawer with hot water.

Laundry does not smell like the softener. (**)

• Detergent is put in the wrong compartment. >>>

If detergent is put in the prewash

compartment although prewash cycle is not selected, machine can take this detergent

during rinsing or softener steps. Wash and clean the drawer with hot water. Put the

detergent in the correct compartment.

• Detergent was mixed with the softener. >>>

Do not mix the softener with detergent.

Wash and clean the drawer with hot water.

Detergent residue in the detergent drawer. (**)

• Detergent was put in wet drawer. >>>

Dry the detergent drawer before putting in

detergent.

• Detergent has gotten damp. >>>

Keep detergents closed in an environment free of

humidity and do not expose them to excessive temperatures.

• Water pressure is low. >>>

Check the water pressure.

• The detergent in the main wash compartment got wet while taking in the

prewash water. Holes of the detergent compartment are blocked. >>>

Check the

holes and clean if they are clogged.

• There is a problem with the detergent drawer valves. >>>

Call the Authorised

Service Agent.

• Detergent was mixed with the softener. >>>

Do not mix the softener with detergent.

Wash and clean the drawer with hot water.

There is detergent left on the laundry. (**)

• Excessive laundry was loaded in. >>>

Do not load the machine in excess.

• Wrong programme and temperature were selected. >>>

Select the proper

programme and temperature for the laundry to be washed.

• Wrong detergent was used. >>>

Select the proper detergent for the laundry to be

washed.

Too much foam forms in the machine. (**)

• Improper detergents for the washing machine is used. >>>

Use detergents

appropriate for the washing machine.

• Excessive amount of detergent is used. >>>

Use only sufficient amount of detergent.

• Detergent was stored under improper conditions. >>>

Store detergent in a closed

and dry location. Do not store in excessively hot places.

• Some meshed laundry such as tulle may foam too much because of their texture.

>>>

Use smaller amounts of detergent for this type of item.

• Detergent was put in the wrong compartment. >>>

Put the detergent in the correct

compartment.

• Softener is being taken early. >>>

There may be problem in the valves or in the

detergent drawer. Call the Authorised Service Agent.

Summary of Contents for HTV8733XC0M





































































Search results

Summary of Contents for HTV8733XC0M

Reviews:

Related manuals for HTV8733XC0M

Brands by name

Popular brands

Beko HTV8733XC0M, User Manual

Search results

Summary of Contents for HTV8733XC0M

Reviews:

Related manuals for HTV8733XC0M

Brands by name

Popular brands