Beko HTV8733XC0M User Manual Download Page 63

Page: 63 / 68

63 / EN

Washer-Dryer / User’s Manual

Troubleshooting

Programmes do not start after the loading door is closed.

• Start / Pause / Cancel button is not pressed.>>>

*Press Start/Pause/Cancel button.

• It may be difficult to close the loading door in case of excessive loading.>>>

*Reduce the amount of laundry and make sure that the loading door is closed properly.

Programme cannot be started or selected.

• Washing machine has switched to self protection mode due to a supply problem

(line voltage, water pressure, etc. >>>

Press and hold On/Off button for 3 seconds to

reset the machine to factory settings. (See. “Cancelling the programme”)

Water in the machine.

• Some water may remain in the product due to the quality control processes in the

production. >>>

This is not a failure; water is not harmful to the machine.

There is water leaking from the bottom of the machine.

• There is a problem with hoses or the pump filter. >>>

Be sure the seals of the water

inlet hoses are securely fitted. Attach the hose to the tap tightly.

• Pump filter is not closed securely. >>>

Make sure that the pump filter is closed

securely.

Machine does not fill with water.

• Tap is turned off. >>>

Turn on the taps.

• Water inlet hose is bent. >>>

Flatten the hose.

• Water inlet filter is clogged. >>>

Clean the filter.

• Loading door is not closed. >>>

Close the loading door.

Machine does not drain water.

• Water drain hose is clogged or twisted. >>>

Clean or flatten the hose.

• Pump filter is clogged. >>>

Clean the pump filter.

Machine vibrates or makes noise.

• Machine is standing unbalanced. >>>

Adjust the feet to level the machine.

• A hard substance has entered into the pump filter. >>>

Clean the pump filter.

• Transit bolts are not removed. >>>

Remove the transit bolts.

• Laundry quantity in the machine is too little. >>>

Add more laundry to the machine.

• Machine is overloaded with laundry. >>>

Take out some of the laundry from the

machine or distribute the load by hand to balance it.

• Machine is in contact with a rigid surface. >>>

Make sure that the machine is not

contacting anything.

Machine stopped shortly after the programme started.

• Machine has stopped temporarily due to low voltage. >>>

It will resume running

when the voltage restores to the normal level.

Machine directly discharges the water it takes in.

• Draining hose is not at adequate height. >>>

Connect the water draining hose as

described in the user manual.

No water can be seen in the machine during washing.

• The water level is not visible from outside of the washing machine. This is not a

failure.

Summary of Contents for HTV8733XC0M





































































Search results

Summary of Contents for HTV8733XC0M

Reviews:

Related manuals for HTV8733XC0M

Brands by name

Popular brands

Beko HTV8733XC0M, User Manual

Search results

Summary of Contents for HTV8733XC0M

Reviews:

Related manuals for HTV8733XC0M

Brands by name

Popular brands