Page 9
Connection to the power supply
must be
carried out by a licensed electrician, who will
ensure that the hob is correctly connected
and safely earthed. The rated current is
printed on the serial number label attached
to the base cover.
The hob must be connected to the mains
through a double pole isolating switch which
has a minimum clearance between the
contacts of 3 mm. in both poles. A means for
disconnection must be provided in the fixed
wiring.
The appliance must be installed by a
qualified person in accordance with
national regulations.
Installation is the buyer’s responsibility.
The manufacturer accepts no liability for
this service.
Any action that the manufacturer has to
take as a result of an erroneous
installation will not be covered by the
warranty.
Installation
DANGER:
Prior to installation,
visually check if the appliance has
any defects on it. If so, do not have
it installed. Damaged appliances
cause risks for your safety.
DANGER:
The appliance must be
installed in accordance with all
local electrical regulations.
Preparation of location and
electrical installation for the
appliance is the customer’s
responsibility.
The worktop must be aligned and fixed
horizontally.
Cut aperture for the hob in worktop as per
installation dimensions.
Cupboard design
Cooking appliances generate considerable
heat. The layout and materials of the
mounting cabinet should take account of
these characteristics.
Surfaces and surrounding edges
immediately adjacent to the appliance
should be able to withstand temperatures of
up to 100°C without delaminating or
discolouring.
This appliance must be earthed
and the manufacturer and the
seller do not accept
responsibility for any damage
due to incorrect installation or
electrical connection.
Before installation
The appliance is designed for installation in
a commercial worktop. A safety distance
must be left between the appliance and the
kitchen walls and furniture. See figure
overleaf (values in mm).
It can also be used in a free standing
position. Allow a minimum distance of 750
mm above the hob surface.
(*) If a cooker hood is to be installed above
the appliance, refer to cooker hood
manufacturer'
instructions
regarding
installation height (min 650 mm)
Remove packaging materials and transport
locks.
Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C
minimum).
Installation and connection
The
appliance
must
be
installed
in
accordance with local electrical regulations.
3
