Hood / User Manual
9 / EN
4
Installation
4.1 Hood installation
B
The use of screws and fasten-
ing elements not specified in the
Operation Manual may cause the
electrical shock.
The minimum distance of hood hanging between
the surface of kitchenware placement over the
cooking range (gas, electric range), and lowest
part of the hood (Fig.3) shall amount at least 45
cm for electric cooking ranges and at least 65 cm
for gas cooking ranges. Should the cooking range
operation manual provide the higher distance for
hood installation, such higher distance require-
ment shall be maintained. The installation of the
hood and chimney body is shown at the figures
(Fig.4 - Fig.9). The hood is equipped with the fix-
ing pins matching to the most part of walls and
ceilings. In course of the assembly, observe the
common rules for air exhaust from the premises.
L
Fig.3
Recommended distances from the cooking
range
Gas cooking ranges L ≥ 65cm
Electrical cooking ranges L ≥ 45cm
Before starting the installation:
•
Check if the purchased device dimensions match
to the planned installation place.
•
Disassembly and remove (if possible) any furni-
ture remaining in the hood installation area, in
order to ensure the easy access to ceiling or wall,
where the hood shall be mounted. If it is not pos-
sible, protect the furniture elements remaining
in the adjacent area.
•
Check, if there is a socket near the mounting
area, and control if the hood may be connected
to the ventilation channel for vapours evacua-
tion.
•
Check if there are no cables (electrical, hydrau-
lic, etc.) in places in which the drilling will be per-
formed.
•
Prepare the following tools: tape ruler, pencil,
drill / electric screwdriver, drilling tool Ø8, screw-
driver, builder’s level.
Assembly operation:
1. Define the axis of cooking range, and project it
onto the wall, where the hood will be mounted.
Sign all characteristic points of hood fastening.
Make the openings with the drill. (Fig. 4)
325mm
4 x O8
2 x O8
325mm
142mm
L+
17
0m
m
124
m
m
m
ax
:550
m
m
m
in
:3
0
Fig.4
Assembly dimensions