Hood / User Manual
11 / EN
4
Installation
Place the chimney body on the hood body. Then,
draw delicately the hood part signed with B
upwards, until it becomes possible to screw it
to the fastening element previously attached to
the wall (Fig. 9).
A
B
A
B
2 x O3,9x9,5
Fig.9
Chimney body assembly
Be especialy attentive while sliding the
chimney body
C
This assembly operation shall be
performed very carefully, in order
to avoid the scratching of chimney
body and hood itself.
4.2 Electrical connections
The network voltage shall correspond to the volt-
age indicated at the plate placed inside the hood.
If the hood is equipped with a plug, insert it into
the socket complying with the applicable require-
ments, and located in the easily accessible place. If
the hood is not equipped with a plug, the hood in-
stallations shall be performed by a person having
the required authorizations (such as electrician).