Preperation
Changing from powder detergent
to tablet detergent:
1. Check that the salt and rinse aid
reservoirs are full.
2. Set the water hardness to its
maximum level and run the machine
empty.
3. After the empty wash cycle, read the
user manual and adjust the water
hardness level according to the water
supplied to you.
3. Lightly press point (B) on the tank
lid to close it.
4. Make the appropriate flush
settings.
Rinse aid
VS
The rinse aid used in
dishwashers is a special
formula used to improve
drying efficiency and
prevent streaks from
limestone on the washed
elements. Therefore, be
sure to use rinse aid in the
rinse aid container and
rinse aids made specifically
for dishwashers.
4. If there are stains on the cutlery after
washing, the level should be
increased, and if you observe a blue
trace after wiping it by hand, it
should be decreased. It is set to level
3 as factory setting.
VS
Adjusting the rinse aid is
described in the section
"Adjusting the amount of
rinse aid" in the machine
operation section.
1. Open the lid of the rinse aid
container using the lever.
VS
Wipe the rinse aid that has
overflowed out of the tank.
Rinse aid that has
accidentally overflowed will
cause foaming and possibly
decrease washing
performance.
2. Fill the reservoir to the “MAX” level.
18 /44 EN
Dishwasher / Instructions for use
