Maintenance and cleaning
Cleaning the pipe filter
Damage to the appliance caused by
impurities from mains water or your
own water installation (e.g. sand, dust,
rust, etc.) can be avoided by to the
filter attached to the water inlet valve.
Regularly check the filter and the hose
and clean them if necessary.
1. Close the tap and remove the hose.
4. Clean the three filters under the tap
using a brush.
5. Place the metal/plastic filter.
2. After taking out the filter, wash it under
running water
6. Place the large filter in the micro
filter. Make sure it is installed
suitable way. Turn the large filter
clockwise until you hear a "click".
3. Replace the cleaned filter in its
place in the pipe.
4. Attach the hose to the
faucet. (varies by model)
VS
Do not use the dishwasher
without a filter.
VS
Improper placement of filters
will reduce washing
efficiency.
36 /44 EN
Dishwasher / Instructions for use
