5 l
EN
Unclogging The Hose
Emptying The Dust Compartment
4
5
When the hose is clogged with
dust,remove it in the following manner.
1. Pull off the hose, and insert the hose
handle into the suction base.
2. Turn on the vacuum cleaner, and the
clogged substances will be exsucted.
NOTE:
Do not use the hose without the handle
in place.lf the hose is used without the
handle, the hose will bend excessively,
causing it to break
When suction power decreases, that
means the dust compartment Is full, turn
off the motor, pull out the hose from the
suction port of the main unit,and clean
out the dirt In the following manner.
1. Remove the cloth filter/water filter
system and clear out the dirt in the dust
compartment.
2. Put back the filter/water filter system to
the previous position and place the top
section to the dust compartment.
NOTE:
The switch and suction inlet in the unit
should face the same direction.
