background image

2 l

EN

1  Important Safety Instructions

•The mains voltage in the house must be 

the same as that of the appliance, which is 

specified on data plate at the bottom of the 

cleaner.

Otherwise the cleaner may be damaged.

• If the mains voltage does not suit to the 

cleaner, connect a 110/220 V 2.1 kVA 

transformer. The vacuum cleaner does not 

have to be connected to an earthed socket.

• Do not leave vacuum cleaner when 

plugged in. Turn off the switch and unplug 

the electrical cord when not in use and 

before servicing.

• The vacuum cleaner and other electrical 

appliances (e.g. receivers, mobile phones) 

may be affected when they are used nearby.

• Do not use the vacuum cleaner outdoors 

or on wet surfaces.

• Do not use the vacuum cleaner in 

horizontal position.

• Do not allow to be used as a toy.

Close attention is necessary when used by 

or near children.

• Do not use with damaged cord or plug. If 

vacuum cleaner is not working as it should, 

has been dropped, damaged, left outdoors, 

or dropped into water, return it to a service 

center before using.

• Do not pull or carry by cord, use cord as 

a handle, close a door on cord, or pull cord 

around sharp edges or corners. Do not run 

vacuum cleaner over cord. Keep cord away 

from heated surfaces.

• Do not unplug by pulling on cord.

To unplug, grasp the plug, not the cord.

• Do not handle plug or with wet hands.

• Do not put any object into openings. Do 

not use with any opening blocked; keep 

free of dust, lint, hair, and anything that may 

reduce airflow.

• Keep hair, loose clothing, fingers, and 

all parts of body away from openings and 

moving parts.

• Do not pick up anything that is burning or 

smoking, such as cigarettes, matches, or 

hot ashes.

• Do not use without dust bag or filter(s) in 

place.

• Turn off all controls before unplugging.

• Do not use to pick up flammable or 

combustible liquids such as gasoline, or use 

in areas where they may be present.

• Always turn off this appliance before 

connecting or disconnecting hose, nozzle or 

accessory tools.

• Hold plug when rewinding onto cord reel. 

Do not allow plug to whip when rewinding.

• For household use only. Use vacuum 

cleaner only for its intended use as 

described in the instructions.

Summary of Contents for BKS 9316












Reviews: