background image

4 l

EN

3  Functions Of Each Part 1

1.The Switch

Press the ON side of the switch to start the 

motor.

To stop the motor.press the OFF side of the 

switch.

2.The Floor Nozzle

The two-way floor nozzle is with two 

positions.

FLOOR: For vacuuming wooden 

floors,linoleum or plastic covered 

floor.

RUG: For vacuuming rugs and 

carpets.

For vacuuming wooden 

floors,linoleum or plastic covered 

floor.

Use the crevice nozzle for corner or 

edge places. If the water is much on 

the floor, you could also use the long 

crevice nozzle to absorb.

Use the round nozzle for furniture, 

curtain, ceiling, etc.

3.Suction Control

• Turn the speed control knob to adjust the 

power & suction power.

The power get minimum when turn the knob 

to “MIN”, and the power get maximum when 

turn the knob to “MAX”.

• Move the regulator plate on the hose 

handle to adjust the suction power.

The suction power gets weak when opened, 

but normally it is used in closed condition.

4.The Blower

Use the blower to blow out dust from 

behind furniture.on bric-a-brac, inside 

radios and TVs.and to clean out hoses.

• Attach the hose to the exhaust outlet.

• Attach the crevice tool to the end of the 

hose.

• Press the ON side of the switch to start the 

motor.

Summary of Contents for BKS 9316












Reviews: