Beko BEKOMAT 8, Installation And Operation Manual, Page: 8 / 28

Installation and operation manual
EN
8 BEKOMAT
®
8/9
1.5. Intended use
The BEKOMAT
®
is an electronically level-controlled condensate drain for compressed air systems. This product is able to drain
condensate from the system components at operating pressure with virtually no pressure loss.
• It is only suitable for use with original spare parts and accessory parts.
• The
BEKOMAT
®
8/9 must not be used in areas subject to frost or areas with a potentially explosive atmosphere.
• Permissible media: oil-contaminated or oil-free condensates
The BEKOMAT
®
may only be operated for the intended purpose and within the specifications stated in the technical data. Do not
operate the unit with any substances or gas/vapour mixtures other than those listed above. Any other use of this system, which
exceeds the intended use, is hereby deemed to be improper and can cause a hazard for the safety of people and the environment.
1.6. Legal warranty and liability for property defects
Warranty claims are voided if the BEKOMAT
®
is used for a purpose other than the intended use or operated outside the limits
specified in the technical data. Such uses include (but are not limited to) the following:
• Technically incorrect installation, incorrect commissioning, incorrect maintenance or incorrect operation
• Operation with defective components
• Non-compliance with the instructions in this manual, in particular the safety instructions
•
Execution of constructive interventions or modifications on the device
• Use of third-party spare parts that have not been approved by the manufacturer for repair and maintenance work