Beko BEKOMAT 8, Installation And Operation Manual, Page: 20 / 28

Installation and operation manual
EN
20 BEKOMAT
®
8/9
6. Maintenance and servicing
DANGER Insufficient qualification
Inappropriate handling due to insufficient qualification can lead to serious property damage and
personal injuries or death.
• Maintenance work may only be carried out by trained service personnel from BEKO TECHNOLOGIES
GmbH or authorised partners.
Recommendation: Annually
Respective set of wear parts:
BEKOMAT
® 8 2000450
BEKOMAT
® 9 4005382
Before all maintenance:
• Shut off the supply line
• Press the TEST button until the BEKOMAT
®
is pressureless
• Disconnect the BEKOMAT
®
from the mains voltage
6.1. Maintenance schedule
Maintenance Interval
Functional test
• Press the TEST button
• Visual inspection daily
Maintenance
• Replace the set of wear parts
• Leakage test
• Functional test
• Check adhesive labels and replace if necessary
• Check length of valve core
• Check cable connections
• Cleaning
annually
Functional test:
The BEKOMAT ® should be tested daily for flawless function.
• To check the solenoid valve, press the TEST button briefly (approx. 2 sec.).
 The BEKOMAT
®
starts manual drainage.
• To check the fault signal, shut off the condensate inlet and press the TEST button for approx. 1 minute.
 The BEKOMAT
®
starts manual drainage and triggers the alarm.
i
During this test, larger quantities of compressed gas can flow into the condensate collecting line.
Maintenance:
Further information about maintenance will be provided on request.