manualshive.com logo in svg

Beko Bekomat 14, Original Installation And Operation Manual, Page: 9 / 64

Share
Download
Beko Bekomat 14 Original Installation And Operation Manual Download Page 9

2.5  Safety instructions

Safety instructions warn against residual risks when handling the product and accessories.
These safety instructions must be strictly observed in order to prevent accidents, personal injury, damage to property 

and impairments during operation.

Structural design of the safety instructions:

SIGNAL WORD

Type and source of danger!

Safety symbol

Possible consequences if the danger is ignored
•  Measure to prevent the danger

Signal words:

DANGER

Imminent hazard

Consequences of non-compliance: Death or serious personal injury

WARNING

Imminent hazard

Consequences of non-compliance: Death or serious personal injury are possible

CAUTION

Potential hazard

Consequences of non-compliance: Personal injury or damage to property are possible

NOTE

Additional notes, information, tips

Consequences of non-compliance: Malfunction and device failure during handling and 

maintenance are possible. No hazard to people or regarding the safe operation.

Original installation and operation manual

BEKOMAT

®

 13, 13 CO, 13 CO PN25, 13 CO PN40

9 | 64

Summary of Contents for Bekomat 14

































































Reviews:

No comments