Beko Bekomat 14, Original Installation And Operation Manual, Page: 29 / 64

7.2.1.2 Power control board DC
Illustration Description / explanation
3
5
6
7
8
1. Loosen the 4 pan-head screws [3] in the top
cover and unscrew the components of the cable
gland [5, 6, 7, 8] .
61
36
2
9
2. Raise the top cover [2] a little and pull the screw
terminal [61] of the power control board up and off.
3. Unscrew the pan-head screw [36] and take the power
control board [9] out of the top cover [2] .
+24 VDC (0V)
0V (+24 VDC)
6 mm (0.23“)
60 mm (2.36“)
4. Prepare the 2-wire cable of the voltage supply.
I
5
6
7
5. Slide the components of the cable gland [5, 6, 7] over
the cable for voltage supply [I] and insert the cable
into the top cover.
Original installation and operation manual BEKOMAT
®
13, 13 CO, 13 CO PN25, 13 CO PN40
29 | 64