background image

 15

6.3.6.3-User Interface Options

From this menu, you can decide whether 

to display the scrambled channels in the 

program table or not.

 If List Scrambled 

Channels

 is set to 

ON

, all channels will 

be displayed, if it is set to 

OFF

, scrambled 

channels will not be displayed and if it is set 

to 

AUTO

 and a CI card is installed to your 

television, then the scrambled channels 

supported by the card will be displayed.

6.3.6.4-Timers

In this menu you can view Reminders you 

had entered from the EPG or change or 

delete the entered Reminders.

6.3.6.5-Favourite Lists

Please see 6.3.4.2-Creating favorite channel 

list, for detailed explanation of this feature.

6.3.6.6-Common Interface Module

In this menu, you can make the CI Module 

settings that you can attach to your 

television.

6.3.6.7-System Menu

You can display your television’s hardware 

and software data under this menu.

6.4-Performing Analog 

Tunings

You can either tune the Analog channels 

automatically or manually and store them in 

your television.

6.4.1-Automatic tuning of channels 

and storing in the memory

Note: 

 If your television does not receive any 

antenna broadcast for a period of 5 minutes, 

it automatically switches to the stand-by 

position. The countdown OSD is displayed 

on the screen during the last 1 minute 

(applicable for Analog mode only)

You can tune the programs automatically 

with the Autoprogram function of your 

television and then sort the channels as you 

desire by means of the Program Table. Press 

AV

 button on your remote control, select 

ANALOG 

 tab from the 

SOURCE

 menu by 

using 

Up/Down

 movement buttons and 

COUNTRY SELECTION

BELGIUM

CZECH REP.

DANMARK

DEUTSCHLAND

ELLADA

ESPANA

FRANCE

HUNGARY

IRELAND

ITALIA

NETHERLANDS

NORGE

ÖSTERREICH

POLSKA

PORTUGAL

SCHWEIZ

SUOMI

SVERIGE

TÜRKİYE

U.K.

..........................

START AUTOPROGRAMMING

BACK

AUTOPROGRAM

SEARCHING

% 20

STOP

In the Country Selection menu, select 

the country, whose broadcast you would 

like to watch in priority, by pressing the 

right/left

 movement buttons and start 

autoprogramming by pressing the 

OK

 

button. The channels will be automatically 

searched and those found will be stored in 

memory starting from the program selected 

in the Setup menu. At the same moment, 

the Autoprogram menu will be displayed 

and a marker indicating the progress of the 

autoprogramming will appear as shown 

below.

SETUP

SYSTEM 

 

I

CHANNEL 

 

S06

FINE TUNE 

 

0

SEARCH

PROGRAM NO  

P13

STORE

AUTOPROGRAM 

         

SELECT

BACK

Select 

PROGRAM

 

NO

 tab by pressing 

the 

Up/Down

 movement buttons in Setup 

menu, enter the channel number to be 

searched and stored automatically, then 

select 

AUTOPROGRAM

 tab by using the 

Up/Down

 movement buttons and press 

OK

 button; Country Selection menu will be 

displayed.

confirm by pressing the 

OK

 button. Your 

TV will switch to Analog mode. Press the 

MENU

 button on your remote control. Select 

SETUP

 tab with 

Down

 movement button 

and confirm with 

OK

 button. Setup menu is 

displayed.

Summary of Contents for 15WLP530HID


































Reviews: