16
6.4.2.2-If you do not know the
channel number
Press the
MENU
button. Move to
the
SETUP
menu by pressing the
Down
movement button in the Main
Menu and confirm your selection
with the
OK
button. Setup menu will
be displayed. Select the system in
which you would like to make the
search from the
SYSTEM
tab. Move
into
CHANNEL
tab by pressing
the down movement button. Press
OK
on your remote control to
select
“S
” for cable channels and
“C”
for channels received via the antenna.
Select
SEARCH
tab using the
Up/Down
movement buttons, and scan the channels
in ascending order with
Right
movement
button and in descending order with
Left
movement button. If the channel that is
found is of your liking, select the
STORE
tab.
Then store it in the memory by pressing the
Right
or
Left
movement buttons. Repeat
the same procedure for other channels by
selecting the program number of your choice
from the
PROGRAM
NO
tab. If the channel
you found is not of the desired quality and
requires Fine Tuning or if you would like to
rename the channel, refer to the relevant
sections.
6.4.3-Fine Tuning
If the channel you found is not of
the desired quality and requires Fine
Tuning, then select the
FINE
TUNE
tab by pressing the Down movement
button in the
Setup
menu. Using
the
Left/Right
movement buttons
on your remote control, adjust the
broadcast displayed on the screen to your
desired quality. Under normal circumstances,
you will not require to use the Fine Tune
function. The AFC values of your television
will automatically adjust and lock themselves
to the channel. However, you might need
it in case the television transmitters do not
operate according to the standards. To store
in the memory the settings you have made,
select the
Store
tab and press the
Right
or
Left
movement button.
Select the system in which you
would like to make the search
from the
SYSTEM
tab. Move into
CHANNEL
tab by pressing the down
movement button. Press
OK
on
your remote control to select
“S
” for
cable channels and
“C”
for channels
received via the antenna. Move
onto the
PROGRAM
NO
tab and
using the number buttons enter the channel
number in which you would like to have the
channel stored. If the broadcast viewed on
the screen is of your desired quality, first
move onto the
STORE
tab with the down
movement button to store in the memory
the selection you have made and store
the channel by pressing the
Left
or
Right
movement buttons. The prompt
STORED
will be displayed briefly. The channel will be
stored according to the program number
of your choice. You can tune and store in
memory other channels the same way. In
the event that you wish to exit the channel
settings menu for any reason, simply press
the
EXIT
button.
SETUP
SYSTEM
I
CHANNEL
S06
FINE TUNE
0
SEARCH
PROGRAM NO
P13
STORE
AUTOPROGRAM
CHANGE
BACK
To stop the process at any given time,
please press the
MENU
button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the automatic search is complete.
6.4.2-Manual tuning of channels and
storing in the memory
6.4.2.1-If you already know the
channel number
Press the
MENU
button. Move to the
SETUP
menu by pressing the Down
movement button in the Main Menu and
confirm your selection with the
OK
button.
Setup menu will be displayed.
