33
8.4.8
Enable Control output 1:
EnbL
This is a sub-function in the Control output 1 function
oP1
which allows output 1 to be enabled or disabled
without changing any of the
on
or
off
times and also
determines whether output 1 turns
on
and
off
once
or twice in each twenty four hour period.
Select
oP1
in the configuration menu and press
(
which will result in the
EnbL
prompt being displayed.
Pressing
(
again will enter the sub-function from
which one of the three options may be selected
using the
*
or
&
button:
Display
Control output 1
oFF
Control output 1 disabled
on : 1
Turns
on
&
off
once per 24 hours
on : 2
Turns
on
&
off
twice per 24 hours
When the required option is displayed operating
)
will enter the selection and return to the
EnbL
prompt
from which another sub-function may be selected if
control output 1 has not been disabled.
8.4.9
On
and
off
times:
oP 1 : on 1
;
oP 1 : off 1
oP 1 : on 2
;
oP 1 : off 2
The control output will have one or two
on
and
off
times depending upon whether control output 1 has
been configured to turn
on
and
off
once or twice in
each 24 hour period. - see 8.4.8.
All of the times are adjusted in the same way. To
adjust any of them select
oP1
from the configuration
menu and press
(
which will result in the
EnbL
prompt being displayed. The
*
or
&
button will
scroll through the sub-functions. Only
oP 1 : on 1
and
oP1 : oFF1
will be present if control output 1 has been
configured to switch
on
and
off
once in a 24 hour
period in the
EnbL
sub-function.
Select the required sub-function
oP1
:
on1
Time oP1 turns
on
first time
oP1
:
oFF1
Time oP1 turns
off
first time
oP1
:
on2
Time oP1 turns
on
second time
oP1
:
oFF2
Time oP1 turns
off
second time
When selected, pressing
(
will show the existing
time with the hours flashing.
Using the
*
or
&
button adjust the hours and then press
(
to
transfer control to the minutes display, pressing
(
again will transfer control to the seconds display.
When the time has been set as required press
)
to
return to the sub-menu from which another
on
/
off
time may be selected for adjustment. When all the
on
/
off
times have been entered, return to the
configuration menu by pressing the
)
button twice.
8.4.10 Control output 2 (Optional): oP2
Control output 2 is an optional factory fitted output
which can be configured to turn
on
(output closed)
and
off
(output open) twice in each twenty-four hour
period. The control output status is shown by the '2'
control output display annunciator.
Function
oP2
contains a sub-menu with five sub-
functions:
EnbL
Number of times output 2
turns
on
&
off
in 24 hours.
oP 2
:
on 1
First time when oP 2 turns
on
(closes)
oP 2
:
oFF 1
First time when oP 2 turns
off
(opens)
oP 2
:
on 2
Second time when oP 2 turns
on
(closes)
oP 2
:
oFF 2
Second time when oP 2 turns
off
(opens)
To check or change the function of Control output 2
select
oP2
from the configuration menu and press
(
which will reveal the first sub-funtion
EnbL.
8.4.11 Enable control output 2:
EnbL
This is a sub-function in the Control output 2 function
oP2
which allows output 2 to be enabled or disabled
without changing any of the
on
or
off
times and also
determines whether output 2 turns
on
and
off
once
or twice in each twenty four hour period. Select
oP2
in the configuration menu and press
(
which will
result in the
EnbL
prompt being displayed. Pressing
(
again will enter the sub-function from which one
of the three options may be selected using the
*
or
&
button:
Display
Control output 2
oFF
Control output 2 disabled
on : 1
Turns
on
&
off
once per 24 hours
on : 2
Turns
on
&
off
twice per 24 hours
When the required option is displayed operating
)
will enter the selection and return to the
EnbL
prompt
from which another sub-function may be selected if
control output 2 has not been disabled.
8.4.12
On
and
off
times:
oP2 : on 1
;
oP2 : off 1
oP2 : on 2
;
oP2 : off 2
The control output will have one or two
on
and
off
times depending upon whether control output 2 has
been configured to turn
on
and
off
once or twice in
each 24 hour period. - see 8.4.11.
All of the times are adjusted in the same way. To
adjust any of them select
oP2
from the configuration
menu and press
(
which will result in the
EnbL
prompt being displayed. The
*
or
&
button will
scroll through the sub-functions. Only
oP2 : on1
and
oP2 : oFF1
will be present if control output 2 has been
configured to switch
on
and
off
once in a 24 hour
period in the
EnbL
sub-function.
Summary of Contents for BA577E
Page 1: ...Issue 4 3rd July 2018 BA577E One input General purpose Timer or Clock Issue 4...
Page 18: ...18...
Page 19: ...19...
Page 30: ...30...
