Beisler 1281/5, Operating Instructions Manual

Page: 42 / 86

7. Error messages
In case of an error in the control system or in the machine program
corresponding error messages are indicated in the display.
Display Meaning
Error 1 One of the parameters “18” or “19” is switched on
(value = 1)
Error 2 Both parameters “18” and “19” are switched on
(value = 1)
Error 3 In the current program the last
existing seam was to be deleted.
Errors of free programming
Info U1 FP custom code wrong, e.g. describing a parameter
which does not exist.
Info U2 Wrong system function
Info U3 Wrong in / out number
Info U4 Too many user variables
Info U5 Too many system variables
Info U6 Not enough storage location for the user program
Info U7 Wrong or undefined key in the Vario
Info U8 Unknown device address
Info U9 Fatal exception error
Errors and informations bootload
Info B1 Switch on control in the boot mode and press key “F2”
Info B2 Programming of segment number
Info B3 Flash programming failed
Info B4 Flash programming okay
38