Beisler 1281/5, Operating Instructions Manual

Page: 39 / 86

Output test
–
Press key “ P ”.
–
Press key “ 8 ”.
–
Press key “ Plus ”.
–
Select the output element to be tested with the keys “ Plus ” or
“ Minus ”.
–
Switch the output on or off with the key “F2”.
–
Press key “ Program stop ”.
The program is quitted.
Output elements
Switch Designation
Y01 Sewing foot up / down
Y02 Thread tension lift open
Y03 Contour guide up / down
Y04 Stacker off / on
Y05 Ejector roller up / down
Y06 Feeding unit up / down
Y07 Contour guide forward / backward
Y08 Contour guide blowing on
Y09 Move contour guide laterally
Y10 Differential bottom feed on / off
Y11 Needle feed on / off
Y12 Warp separator off / on
Y13 Table blowing off / on
Y14 Dirt suction off / on
Y15 Puller up / down
Y16 Mouse back
35
1