Beijer Electronics BFI-H3, Start-Up, Page: 5 / 32

Beijer Electronics Frequency Inverter BFI-H3
KI00363D 2021-07
www.beijerelectronics.com
5 (32)
4.3 Physical dimensions IP20
BFI-H3-IP20
Drive
size
A
Height
[mm]
B
Width
[mm]
C
Depth
[mm]
D
[mm]
E
[mm]
Weight
[kg]
1 x 230 V 3 x 230 V 3 x 400 V
0043
– 0105
[0,75
–2,2 kW]
0043
– 0105
[0,75
–2,2 kW]
0022
– 0140
[0,75- 5,5 kW]
2 221 110 185 209 63 1,8
None
0180
– 0240
[4,0
– 5,5 kW]
0180
– 0300 [7,5
– 15 kW]
3 261 131 205 247 80 3,5
None
0300
– 0460
[7,5
– 11 kW]
0390
– 0460 [18
– 22 kW]
4 418 172 240 400 125 9,2
None
0610
– 0900
[15 - 22 kW]
0610
– 0900
[30 - 45 kW]
5 486 233 260 460 175 18
None
1100
– 1500
[30 - 37 kW]
1100
– 1500
[55 - 75 kW]
6A 614 286 320 578 200 32
None
1800
– 2020
[45 - 55 kW]
1800
– 2020
[90 - 110 kW]
6B 726 330 320 680 225 43
None None
3700
– 4500
[200 - 250 kW]
8 995 480 477 942 432 130
NOTE
Mounting Bolts: Size 2, 3: 4 x M4; Size 4,5, 6A: 4 x M8; Size 6B: 4 x M10; Size 8: 4 x M12.
Required tightening Torques Control terminals All Sizes: : 0,5 Nm.
Required tightening Torques Power terminals
Size 2, 3: 1,0 Nm; Size 4: 2 Nm; Size 5: 4 Nm
Size 6A: 12 Nm; Size 6B: 15 Nm; Size 8: 57 Nm
4.4 Low Harmonic Variants
The majority of the Beijer BFI-H3 product range is based on a low harmonic solution using
film capacitor technology to achieve compliance with EN 61000-3-12 without the need for
any additional equipment. This standard specifies limits for harmonic currents for equipment
connected to public low-voltage systems with input current > 16A and <= 75A per phase. It is
important to understand which models from the product range are of the low harmonic
technology.
In short, this means that the low harmonic drives do not require an input choke and should not
have one installed.
Drives outside of the above rated input current, are of standard electrolytic capacitor design
and could benefit from the use of input chokes if further harmonic reduction is required.