Beijer Electronics BFI-E3 Series, Start-Up

Page: 22 / 28

Beijer Electronics Frequency Inverter BFI-E3
KI00369C 2021-09
www.beijer.se www.beijer.no www.beijer.dk www.beijerelectronics.de www.beijerelectronics.com www.beijerelektronik.com.tr
22 (28)
6
Keypad
The drive is configured, and its operation monitored via the keypad and display.
NAVIGATE
Used to display real-time information, to access and
exit parameter edit mode and to store parameter
changes
UP
Used to increase speed in real-time mode or to
increase parameter values in parameter edit mode
DOWN
Used to decrease speed in real-time mode or to
decrease parameter values in parameter edit mode
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running
drive.
START
When in keypad mode, used to Start a stopped drive
or to reverse the direction of rotation if bi-directional
keypad mode is enabled
Operating Displays Changing Parameters Read Only Parameter
Access
Resetting Parameters
Drive
Stopped/
Disabled Press and
hold the
Navigate key
> 2 seconds Press and
hold the
Navigate key
> 2 seconds To reset
parameter
values to their
factory default
settings, press
and hold Up,
Down and
Stop buttons
for > 2
seconds.
The display
will show
.
Drive is
enabled /
running,
display
shows output
frequency
(Hz) Use the up
and down
keys to select
the required
parameter Use the up
and down
keys to select
P-00
.
Press the
Navigate key
for < 1 sec.
Display will
show motor
current (A) Press the
Navigate key
for < 1
second Press the
Navigate key
for < 1
second Press the Stop
key.
The display
will show
“ ”
.
Press the
Navigate key
for < 1
second.
The display
will show
the motor
power (kW) Adjust the
value using
the Up and
Down keys Use the up
and down
keys to select
the required
Read Only
parameter
If P-10 > 0,
pressing the
Navigate key
for < 1
second will
display the
motor speed
(RPM) Press for < 1
second to
return to the
parameter
menu Press the
Navigate key
for < 1
second to
display the
value
Resetting a Fault
Press the Stop
key.
The display
will show
“ ”
Drive is in
fire mode
and can’t be
reset
until fore
mode is
deactivated Press for > 2
seconds to
return to the
operating
display Press and
hold the
Navigate key
> 2 seconds
to return to
the operating
display