30
9. SPECIFICATIONS
Analog Inputs
Type
1/4” (6.3 mm) TRS unbalanced
Impedance
100 kOhms
Nominal Operating Level
-10dBV to +4dBu
Max. Input Level
+16 dBu
Analog Outputs
Type
1/4” (6.3 mm) TRS unbalanced
Impedance
100 Ohms
Max. Output Level
+16 dBu
Bandwidth
20 Hz to 20 kHz (+0/-0.5 dB)
THD+N @ 1kHz / +10 dBu
0.01 %
S/N Ratio @ 1 kHz / +10 dBu
98 dB
Crosstalk @ 1kHz
80 dB
MIDI Interface
Type
5-Pin-DIN-Socket IN / OUT / THRU
Implementation
Refer to MIDI Implementation Chart in Chapter 7
Digital Processing
Converters
20-bit Sigma-Delta, 64/128-times Oversampling
Sampling Rate
48 kHz
Feedback Destroyer
Type
DSP-controlled Digital Signal Analysis
Filter
12 independent, digital Notch Filters per channel
Frequency Range
20 Hz to 20 kHz, adjustable in steps of 1/60 octave
Bandwidth
2/60 to 12/60 octaves, dependent on the characteristic of the feedback
Attenuation
Up to -48 dB, depending on the gain of the feedback
Time required to
< 0.5 sec, typical at 1 kHz
eliminate feedback
Parametric Equalizer
Type
12 independent filters per channel
Frequency Range
20 Hz to 20 kHz, adjustable in steps of 1/60 octave
Bandwidth
1/60 to 2 octaves, adjustable in steps of 1/60 octave
Gain
+16 to -48 dB in steps of 0.5 dB
Display
Type
2 1/2-digit numeric LED-Display
Power Supply
Mains Voltages
USA/Canada
~ 120 V AC, 60 Hz
U.K./Australia
~ 240 V AC, 50 Hz
Europe
~ 230 V AC, 50 Hz
General Export Model
~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz
Fuse
100-120 V AC: 125 mA (slow-blow)
200-240 V AC: 63 mA (slow-blow)
Power Consumption
10 Watts
Mains Connection
Standard IEC receptacle
Physical
Dimensions (H * W * D)
1 3/4” (44.5 mm) * 19” (482.6 mm) * 7 1/2” (190.5 mm)
Net Weight
2 kg
Shipping Weight
3.2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
9. SPECIFICATIONS
