25
F-CONTROL
AUDIO
FCA202
ENGLISH
Its small dimensions means that the FCA202, in combination with a laptop computer, provides the
ideal solution for a mobile recording studio. All that you need is a small mixing console or two
microphone preamplifiers, so that you can connect microphones. Given its size, the MINIMIC MIC800
is especially suitable for this type of application. Figure 4,2 shows a setup that includes a laptop
computer, FCA202, and two MINIMIC MIC800 microphone preamplifiers.
Connect the two MINIMIC MIC800 units to the inputs
of the FCA202. With two active loudspeakers
connected to the outputs
of the FCA202, you can control your recording and via the -output
provide a musician with a playback signal. If you dont use a pair of loudspeakers, you can use
headphones to listen to your mix in case you don´t have to provide a musician with a monitor signal.
A setup that includes a laptop computer, an FCA202, headphones, and a sequencer, providesia
compact and mobile music production environment.
5. AUDIO CONNECTIONS
There are various ways to integrate the FCA202 into your setup. Depending on the application you
will need different connecting cables, and these will be discussed in the following section.
5.1 Cabling with jack cables
To operate the FCA202 in series with other equipment, you will need standard commercial 1/4" jack
cables, often referred to as instrument cables or patch cables.
These cables have a 1/4" TS jack plug at each end. Connect the inputs of the equipment with the
corresponding outputs of each of the other devices.
5. AUDIO CONNECTIONS
