Behringer F-Control Audio FCA202, Operating Manual

Page: 17 / 34

17
F-CONTROL AUDIO FCA202
ENGLISH
Make the connection to your computer using one of the two 6-pin FIREWIRE ® sockets. You
can run other FireWire
®
devices such as hard drives, from the second socket. This means
that you always have a free FireWire
®
port available, even if your computer has only one
FireWire
®
socket.
You can connect balanced or unbalanced audio cables with ¼" jack plugs to the BAL/UNBAL
OUT sockets.
You can connect unbalanced audio cables with ¼" TS jack plugs to the UNBAL IN sockets.
3.3 FCA202 CONTROL PANEL
In addition to the device drivers on the PC, a CONTROL PANEL is installed during the installation
process. If you use an ASIO
®
driver, use this software to configure the FCA202. You’ll find more
information on the drivers in Chapter 4.1.
In Windows
®
systems, the panel can be accessed from the “Start Menu”. In the “Start Menu”,
choose “Control Panel”, and then look for the entry “FCA202”. Alternatively, you may find that the
audio software you use has a dialog for opening up the panel. For more information, please refer
to the manual for your audio application.
With Mac OS
®
X, you first have to select the FCA202 in “System Settings” under the entry “sound”.
You can then directly configure the card from the audio application that you use. For more information,
please refer to the appropriate software documentation.
3. OPERATING ELEMENTS AND CONNECTIONS