Behringer Europower PMP1000, Quick Start Manual

Page: 36 / 40

36
EUROPOWER PMP6000/PMP4000/PMP1000
Specifications
PMP6000 PMP4000 PMP1000
Microphone Inputs
Type XLR, electronically balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm
source resistance
-134 dB / 136 dB A-weighted
@ 50 Ohm
source resistance
-131.5 dB / 134 dB A-weighted
@ 150 Ohm
source resistance
-129 dB / 155 dB A-weighted
Frequency response
< 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +10 dB, +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kOhm balanced / 1.3 kOhm unbalanced
Signal-to-noise ratio 109 dB / 112 dB A-weighted (0 dBu In @ +10 dB gain)
Noise (THD + N) 0.002% / 0.0018% A-weighted
Mono Line Inputs
Type ¼" TS connectors, balanced
Impedance approx. 20 kOhm
Max. input level +21 dBu
Stereo Line Inputs
Type
¼" TRS
connectors,
unbalanced
¼" TRS
connectors,
unbalanced
—
Impedance > 3.6 kOhm > 3.6 kOhm —
Max. input level +22 dBu +22 dBu —
Equalizer
Low 80 Hz / ±15 dB
Mid
100 Hz - 8 kHz /
±15 dB
2.5 kHz / ±15 dB 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
2 Track Input
Type RCA
Impedance approx. 3.6 kOhm
Preamp Outputs
MAIN
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
Monitor
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
Stereo Outputs
Type
¼" TRS
connectors,
unbalanced
¼" TRS
connectors,
unbalanced
—
Impedance
approx.
150 Ohm,
unbalanced
approx.
150 Ohm,
unbalanced
—
Max. input level +21 dBu +21 dBu —
Type RCA
Impedance approx. 1 kOhm
Max. input level +21 dBu
PMP6000 PMP4000 PMP1000
Loudspeaker Outputs
Type Professional locking connector
Load Impedance:
MAIN L/R 4-8 Ohm
MONITOR/
MAIN MONO
4-8 Ohm
MAIN MONO/MAIN
MONO
4-8 Ohm
BRIDGE 8-16 Ohm
DSP
Converter 24-bit Delta-Sigma, 64/128-times oversampling
Dynamics D/A 90 dB
Sampling rate 46.875 kHz
Delay Time max. 5 secs
Signal run time
(Line In > Line Out)
approx. 1.5 ms
Display
Type
2 x 2-digit,
7-segment LED
2-digit,
7 segment LED
2-digit,
7 segment LED
Output Power
RMS @ 1% THD, Both Channels Driven:
8 Ohm per channel 300 W 300 W 90 W
4 Ohm per channel 600 W 600 W 130 W
RMS @ 1% THD, Bridged Mode:
8 Ohm 1200 W 1200 W 200 W
Peak Power, Both Channels Driven:
8 Ohm per channel 400 W 400 W 135 W
4 Ohm per channel 800 W 800 W 250 W
Peak Power, Bridged Mode:
8 Ohm 1,600 W 1,600 W 500 W
Power Supply
Mains Voltage
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 10 A H 250 V T 10 A H 250 V T 5 A H 250 V
Fuse 220 - 240 V~ T 6.3 A H 250 V T 6.3 A H 250 V T 5 A H 250 V
Power Consumption
Power consumption 1,050 W 1,050 W 500 W
Mains connector IEC standard receptacle
Dimensions/Weight
Dimensions
(H x W x D)
4.8 x 19.5 x 23.5"
122 x 496 x 596
mm
4.8 x 18.1 x 18.7"
122 x 460 x 476
mm
4.8 x 15.6 x 16.7"
122 x 390 x 425
mm
Weight 28.9 lbs / 13.1 kg 22.9 lbs / 10.4 kg 18.3 lbs / 8.3 kg