33
2.3.4
Cut off or remove the protruding bead using
SE02 side-cutting nippers.
• The welding paddle is to be cleaned using a cotton cloth to remove any plastic residue
stuck to it. On no account should any pointed or sharp-edged objects be used for clean-
ing, as the Teflon coating may then be damaged.
After removing the paddle we advise you to place the EErgo-Z onto the magnetic
stand.
It may be necessary to clean the welding area with a grinder.
Basically, we advise you to practise the welding process and make as many trial
welds as possible.
2.3.5
This is what the welded and deburred belt
looks like at the end of the process.
