GT-600/GT-800 Instruction Manual
55
Entry of Memory Address by Using External Keyboard
The optional USB keyboard is a welcome accessory when inserting memory
address construction (appliance, client, site, location and description) in order to
do the job quickly and simply. Connect the USB keyboard to USB2 connector,
three sound signals follow after plugging it (please wait a few seconds), as a
confirmation of USB-device recognition. Now, the external keyboard is
operational. The following keyboard keys are active to control the GT-600/
GT-800 Tester:
German language, German keyboard
USB keyboard
Function GT-600/GT-800
F1, F2, F3, F4
Menu keys 1 to 4 (3)
F5, F6, F7, F8
Function keys SAVE, RCL, MENU, EXIT
(5)
Esc
Function key EXIT (5)
ENTER
Menu key “
“ (3)
,
Menu keys “
▼
“, “
▲
“
(3)
,
→
Menu keys “
◄
“, “
►
“
(3)
A, B, C … Z, Ä, Ö, Ü
Entry of storage address
0, 1, 2 … 9
Entry of storage address
+, -, _, /, #
Entry of storage address, special
symbols
Space
Entry of storage address, space
Pos 1
Moves cursor to start position when
entering memory address
Ende
Moves cursor to end position when
entering memory address
Deletes character left from the cursor
when entering memory address
Entf
Deletes character at the cursor when
entering memory address
+
Menu key “+“ (3)
-
Menu key “-“ (3)
Table 1: Functions of the USB keyboard (German version)
Note!
Use the USB keyboard listed in the “Available Accessories” section only,
otherwise it may not be recognized by the GT-600/GT-800 Tester.
