Beghelli NOVA NV-10KW Installation And Operation Manual Download Page 5

Page: 5 / 82

Introduction

Congratulations on selecting one of the fine products from the leader in power-protection technology.

Our wide product offering includes Uninterruptible Power Systems (UPS), power conditioners,

automatic voltage regulators, and specialty transformers (e.g., computer-grade, medical-grade). Since

1972, the manufacturer has shipped many of these fine products to discerning customers around the

world for use on sensitive equipment and critical applications.

The

NOVA

Lighting Inverter is a self-contained unit that provides backup power for fluorescent and

incandescent lighting sources such as overhead fixtures and exit signs. If a brownout or power outage

occurs, the inverter provides 90 minutes of lighting power to ensure a safe building evacuation. On line

pulse-width modulation (PWM) handles the switchover from utility power to battery power

automatically, without interruption or manual intervention. Convection cooling allows the inverter to

operate virtually silently.

Scope and Audience

This guide is intended to be used as a reference for users responsible for installing, operating, and

maintaining this equipment.

Safety and Warnings

This guide uses the following symbols to draw your attention to certain information

Symbol

Meaning

Description

Note

Notes emphasize or supplement important points of the main text.

Tip

Tips provide helpful information, guidelines, or suggestions for

performing tasks more effectively.

Caution

Cautions indicate that failure to take a specified action could result in

damage to the hardware.

DANGER

The Danger symbol warns users of possible injury or death if

instructions are not followed.

Hazardous

voltage

Hazardous voltage inside. Only authorized personnel may service this

equipment.

Electrostatic

sensitive

Components are Electrostatic Discharge Susceptible (ESDS)
Use a grounded ESD wrist strap.

Warranty Registration and Warranty Certificate Request

Web:

www.beghelliusa.com/downloads/forms/nova-warranty-request.pdf

Beghelli U.S.A., 3250 Corporate Way, Miramar, Florida, Tel: (800) 726-4316 Tel: (954) 442-6600 Fax: (954) 442-6677

NOVA

6, 8, 10, 15 & 17KW

Summary of Contents for NOVA NV-10KW



















































































Search results

Summary of Contents for NOVA NV-10KW

Reviews:

Related manuals for NOVA NV-10KW

Brands by name

Popular brands

Beghelli NOVA NV-10KW, Installation And Operation Manual

Search results

Summary of Contents for NOVA NV-10KW

Reviews:

Related manuals for NOVA NV-10KW

Brands by name

Popular brands