background image

  

23 

EN

Technical Data

Article number:

08681

Model number:

22901A0

Voltage supply:

220 – 240 V~ 50 / 60 Hz

Power:

1600 W

Protection class:

Timer:

up to 9 min 30 s

Temperature setting:

200°C – 850°C

ID of operating instructions:

Z 08681 M DS V1 0319

  

  

Troubleshooting

If the device does not work properly, 

fi

 rst check whether you are able to rectify the 

problem yourself. If the problem cannot be solved with the steps below, contact the cus-
tomer service department.

Do not attempt to repair an electrical device yourself!

Problem

Possible cause

Fix

The device does not 
work. The displays on 
the control panel do 
not switch on.

The mains plug is not 
inserted correctly in the plug 
socket.

Push the mains plug into the 
plug socket as far as it will go.

The plug socket is defective.  Try another plug socket. 
There is no mains voltage.

Check the fuse of the electrical 
distributor (fuse box).

The overheating protection 
has been triggered.

Pull out the mains plug and 
allow the device to cool down 
completely. Then try again.

The fuse in the elec-
trical distributor (fuse 
box) is triggered.

Too many devices connect-
ed to the same circuit.

Reduce the number of devices 
in the circuit.

08681_de-en-fr-nl_Inlay_A5_V1.indb   23

08681_de-en-fr-nl_Inlay_A5_V1.indb   23

26.03.2019   11:59:16

26.03.2019   11:59:16

Summary of Contents for GOURMETMAXX 22901A0











Reviews: