background image

EN

 

22

The most reliable way to determine 
the degree of cooking is to use a core 
temperature measuring device (not 
supplied with the device).

To freshen up the crust, grill the 
meat at the highest temperature 
setting for a few more seconds on 
each side after the resting phase. 
But the degree of cooking may 
change slightly here.

13. After use, 

fl

 ip the main switch to po-

sition 

0

 and pull the mains plug out of 

the plug socket.

14. Allow the grill and the accessory to 

cool down. Then clean them (see the 
“Cleaning and Storage” chapter).

Using the Grill Tray

The grill tray (

7

) is suitable for smaller 

pieces of food or preparing sauces. 
While the meat is being grilled in the 
upper section of the grill chamber, for ex-
ample, vegetables may be cooked in the 
grill tray in the bottom section of the grill 
chamber. The meat juice dripping down 
helps to season the vegetables.
Our recommendation for a sauce: Allow 
butter, garlic and rosemary to melt in the 
grill tray during the grilling process.

Cleaning and Storage

PLEASE NOTE!

 

Pull the mains plug out of the plug 
socket and allow the device and 
accessories to cool down before doing 
any cleaning.

 

Do not use any caustic or abrasive 
cleaning agents or scouring sponges 
for cleaning. The surfaces may be 
damaged!

Rinse the accessory after each use. The 
grill should also be freed of any crumbs, 
fat deposits or other contamination after 
use.
•  Remove any dirt from the grill with 

a damp cloth and a little detergent. 
The easiest way to clean the device 
after use is in a lukewarm (not hot!) 
condition.

•  The rack frame (

2

) can be removed 

from the grill chamber (

10

) for clean-

ing. To do this, it must be lifted slightly 
at the back as it is held in position by a 
hook (

11

) at the bottom.

•  Clean the used accessory with deter-

gent and warm water or in the dish-
washer. In the case of any stubborn 
dirt, soak it beforehand in warm water 
and detergent.

•  Dry all parts thoroughly before assem-

bling or putting them away.

•  Keep the grill in a dry place, protected 

from direct sunlight at temperatures of 
between 0 and 40°C.

•  Store out of the reach of children and 

animals.

08681_de-en-fr-nl_Inlay_A5_V1.indb   22

08681_de-en-fr-nl_Inlay_A5_V1.indb   22

26.03.2019   11:59:16

26.03.2019   11:59:16

Summary of Contents for GOURMETMAXX 22901A0











Reviews: