51
Commissioning
BEEM - Elements of Lifestyle
EN
Prior to first use
Wipe the appliance and the accessories with a slightly damp
cloth.
Install the hot plate (1) and drip tray (9) with cup rest (10) in the
appliance.
Turn the selector switch (4) to the middle position
and insert
the mains plug into the plug socket.
Rinse out the water tank with clean water and fill the water tank
(16) up to the
— MAX —
mark as described in chapter
Filling
the water tank
.
Place a screen insert (6) without coffee powder into the screen
carrier (7) as described in chapter
Installing the screen
insert
.
Install the screen carrier (7) as described in chapter
Installing
the screen carrier
.
Switch on the appliance as described in chapter
Switching the
appliance ON/OFF
.
Place a sufficiently large cup or bowl on the cup rest (10) under
the screen carrier (7).
Turn the selector switch (4) to position
and allow water to run
through the appliance.
NOTE
During the first pumping process, unusual noises may be
►
heard. These noises will stop once the appliance is filled
with water.
Turn the selector switch (4) to the middle position
and pour
the collected water away when the cup or bowl is full.
Repeat the last steps until roughly half the contents of the water
tank has run through the machine.
Empty the drip tray as described in chapter
Emptying the drip
tray
.
Clean the screen as described in chapter
Emptying/cleaning
the screen insert
and install the screen carrier with empty
screen insert again.
